WTH-CS/Wi-Fi/AC-R
www.watchfuleyesolutions.com Surge Counter (Smart Detector)
Paperless Datasheet
Going green and protecting environment is manufacturers' responsibility. WatchfulEye products have the links of downloading data sheet on its enclosure:
http://datasheet.watchfuleyesolutions.com/USW127325.html
Application Range
WTH-CS/Wi-Fi/AC series surge counter is used to test and record the discharge frequency of the surge protector ( record the surge current rush frequency beyond certain degree) and SPD remote contacts monitoring, which is convenient for users to do statistics and analysis on the surge situation in specific area. It can be used accompanying with various surge protectors or used as the supported product of the surge protective box.

Main Features
1. Large counting range, wide application range
2. Sensitive response, precision counting, no mis-operation
3. 3-bit digital display, easy and clear to recognize
4. No data loss in case of power outages
5. DIN-rail installation, convenient for installation and replacement
6. Adopting single-chip technology, advanced and reliable structure
Technical Data
Model WTH-CS/Wi-Fi/AC-R
Rating 100-240VAC 50/60Hz
Ordering Code USW127325
NO/NC Monitoring YES
Network Connection Wi-Fi
Effective action current >1kA
Max. discharge current (8/20µs) 80kA
Sampling mode Inducance coil
Counting number 0~999
Protection Rating (IP Code) IP 20
Temperature Range - 40°F to 176°F (-40°C to 80°C)
Relative Humidity 0% to 95% noncondensing
Maximum Operating Altitude 10,000 feet (3000m)
DIN Rail EN60715 35mm top-hat rail
Dimensions DIN 43880 54mm (3TE)
Housing Material Thermoplastic (UL94 V-0)
Housing Design Modular design
Net Weight Per Unit 0.30Lb (138g)
Product Dimension (W×H×D) 2.1"×3.7"×2.7" (54mm×93mm×68mm)
Expansion: SPD Remote Monitoring
Cloud Service http://www.greenspd.com

Direction for Use
1. Connect the induction coil of surge counter to the 2-port pluggable terminal block (no direction). Hitch the induction loop to the earthing line.
2. Connect SPD remote contacts to the 4-port pluggable terminal block.
3. Connect power line (110/220VAC) to L/N port of surge counter, and then LED is on.
Connection Diagram


Dimensions


Visit us at